RO水处理系统

RO水处理系统

The device’s key part is reverse osmosis membranes that is from the America, it has a good performance to eliminate salts and the high pressure pump is from a high quality pump producer in China, it’s easy to handle for its simple structure. The source water, in the case that the conductivity is less than 500us/CM, can reach the national standards totally after treatment by this device, it’s the most ideal equipment for water treatment. 该装置的关键部件为美国产反渗透膜，除盐性能好，高压泵采用国内优质泵，结构简单，操作方便。水源水经本装置处理后，电导率在500us/CM以下的情况下，完全能达到国家标准，是您理想的水处理设备。

Characteristic特性:

RO: reverse osmosis selected Hydrautics membrane Brand supporting material of glassfiber reinforced plastic pressure vessels dedicated RO membrane element 采用海德能品牌选择性反渗透膜，支持材料为增强塑料压力容器专用RO膜元件

High-pressure pump provide power to reverse osmosis, use  multi-level Vertical pump 1 unit, 为反渗透提供动力，使用多级立式泵1台

RO protect system: set up pressure switch on inlet and outlet of the high-pressure pump.

When the pressure of the inlet is lower then the limit value (water scarcity≤0.05Mpa) or the pressure of the outlet is higher than limit value(P≥1.8Mpa),the pressure switch send signals to the control system and alarm, high-pressure pump stop running automatically, to ensure the safety of the RO system. The high-pressure pump is equipped with valve; the reverse osmosis membrane can lift pressure slowly, to avoid the damage of high-pressure water impact. RO concentrated water end set electrically operated valve, used when low-pressure rinsing. There will be auto low-pressure rinsing 10-20min when RO system stops running, to avoid deposition and fouling on the membrane surface.   Regular low-pressure large flow auto cleaning of reverse osmosis system在高压泵的进出口设置压力开关。当进口压力低于限制值（水压≤0.05Mpa）或出口压力大于限制值（P≥1.8Mpa）时，压力开关向控制系统发送信号并发出警报，高压泵自动停止运行，以确保RO系统的安全。高压泵配备有阀门；反渗透膜可以缓慢提升压力，以避免高压水冲击造成的损害。RO浓水端设置电动操作阀，用于低压冲洗。当RO系统停止运行时，将自动进行10-20分钟的低压冲洗，以防止膜表面沉积和污染。 定期进行低压大流量自动清洗反渗透系统

Display :RO water product quantity display online在线显示RO水产品数量

System control: The system use centralized control method (auto and manual two statuses).There is a process control box, operation status is clear. Each tank’s liquid level系统采用集中控制方式（自动和手动两种状态）。有一个过程控制箱，操作状态清晰。每个水箱的液位